Ozone Systems

• Standard 25- and 50-gal
(95 and 189 L)/min Models
• High Ozone Production
• Kills Bacteria in Water
• Improves Taste of Water

West Heat’s side-stream ozone systems are complete frame-mounted modules designed specifically for highquality bottled water operations. Two standard systems are available: The SSOZ-25A produces enough ozone to treat up to 25 gallons (95 L) per minute. The SSOZ-50A produces up to 50 gallons (189 L) per minute. Larger-capacity systems are available on request. These compact systems are designed to keep ozone residual levels from 0.1-0.4 mg/L. The system utilizes an air-cooled, patented “Cold Spark” Corona Discharge Generator. This technology allows the production of a high concentration of ozone while generating very little heat, eliminating the need for additional water-cooling mechanisms for the ozone tubes.
West Heat’s “side-stream” ozone systems are reliable, cost-efficient and easy to maintain. In this process, product water is drawn from a storage tank by the integral stainless steel repressurization pump. Part of the water flowing through this pump is “side-streamed” through another stainless steel pump, which drives the water through a Venturi Injector Assembly where ozone is injected into the water. This side-stream of ozonated water is then routed to the contact tank, where it is mixed well with the main flow of product water from the repressurization pump before delivery to a filler system.

Standard System Features

West Heat’s SSOZ-25A and SSOZ-50A Ozone Systems are designed to provide effective mixing and mass transfer of the ozone and product water prior to entering the filler. The stainless steel contact tank further increases the effectiveness level of ozone in the product water by allowing adequate contact time of ozone with the product water.
• Standard 25-gal (95 L) and 50-gal
(189 L)/ min. output; larger versions available
• Designed to meet IBWA-recommended ozone level in product water
• Stainless Steel Frame
• Air-cooled, high-frequency Corona discharge ozone generator
• Automatic high-capacity oxygen concentrator
• 25-gal (95 L) per min. model: 55-gal (208 L) stainless steel contact tank.
• 50-gal (95 L)/min. model: 100-gal (378 L) stainless steel contact tank
• Venturi Injector Assembly with by-pass
• Schedule 80 PVC plumbing components
• Vacuum safety control
• Produces up to 4 grams per hour (25 gal/95 L) per min. model; Up to 10 grams per hour (50 gal/189 L) per min. model)
• Ozone monitor/controller unit
• Limited 12-month warranty

Specifications:

*Three-phase available upon request.

Download Brochure