SIMPLIFIES THE LOADING OF PURGING COMPOUNDS.

USE THIS HIGH DENSITY POLYETHYLENE HOPPER ON ANY MACHINE WITH A 1.5" DIAMETER OR LARGER FEED OPENING.

POWERFUL MAGNETS HOLD THE HOPPER IN PLACE. THEY'RE LIGHTWEIGHT YET DURABLE AND VERY INEXPENSIVE. THEY ALSO WORK WELL ON 45 GAL DRUMS FOR APPLICATIONS SUCH AS WASTE OIL.

H-ACDR-0012-7716-0000

POWERFUL NEODENIUM MAGNETS   
 HELP HOLD HOPPER IN PLACE

INFRA-KOTE HEAT TRANSFER COMPOUND

Infra-Kote improves the contact between your heater and your equipment, extending heater life, providing better response times and reducing energy costs.

Maximum continuous service point 350 deg. F

16 OZ JAR INFRA-KOTE WITH BRUSH TOP 

H-ACDR-0010-3781-0000

2 OZ JAR INFRA-KOTE WITH BRUSH TOP

H-ACDR-0010-7264-0000

HIGH HEAT THREAD LUBE / ANTI-SEIZE COMPOUND

This compound protects equipment from the seizing of threads caused by long term exposure to high heat. It can withstand short durations of heat as high as 600 deg F.

Maximum continuous service point 350 deg. F. Use for nozzle and screw tip threads, cylinder end cap bolts, etc.

16 OZ HIGH HEAT THREAD LUBE WITH BRUSH TOP

H-ACDR-0010-3781-0000    

2 OZ HIGH HEAT THREAD LUBE WITH BRUSH TOP

H-ACDR-0010-7264-0000

THREAD SEALANT TAPE WITH TEFLON

 Seals against gas, air, oil and water.

 Resists chemicals, corrosives, caustics and solvents and +500º heat.

 Seals effectively in two or three wraps.

 Withstands hydraulic pressure up to 10,000 psi.

1/2" WIDE X 108 FT (12.7MM X 33M) ROLL 

H-ACDR-0010-5579-0000  

REVERSIBLE COPPER GAUZE

Copper gauze is excellent for cleaning screws, barrels and molds. Soft copper will not scratch or harm precision work surfaces. The outer mesh is a medium grade mesh for more gentle cleaning, but for tougher tasks the qauze can be turned inside out for a heavier grade mesh.

Outside cleaning grit: .002”

Inside cleaning grit: .019”

4 IN. WIDE X 100 FT.  (10CM X 30M)       

H-ACDR-0012-3300-0000 

Hot Nozzle Gloves with Anti-Slip Coating

Protect operators’ hands and wrists from hot molding equipment

v       Heat resistant up to 400 degrees F.

v       Special nitrile rubber coating for improved grip.

v       Comfortable and breathable 100% cotton.

v       Extra thick inner liner for additional heat resistance.

v       One size fits all, can be worn on either hand.

H-ACDR-0011-0671-0000

Hot Nozzle Gloves with Long Cuff

Protects operators’ hands and wrists from hot molding equipment

v       Heat resistant up to 450 degrees F.

v       Extra long cuff for wrist protection.

v       Made of thick, tightly knit terry cloth – 100% cotton.

v       One size fits all, can be worn on either hand

H-ACDR-0010-1318-0000