|
ELECTRICAL INSULATION PUTTY TAPE |
GLASS CLOTH TAPE NO. 27 |
||||
|
Electrical Insulation Putty can be wrapped, stretched or molded around irregular shapes for quick, smooth insulation build-up. Use this putty to insulate connections up to 600 volts and to round out high-voltage connections to gear, smooth bus bar irregularities, and make a moisture seal at ground wire exits in high-voltage splices. H-ACIN-PIHT-1500-0060 |
 |
|
(High Temperature Electrical Wiring Tape)
High heat splicing tape composed of a glass cloth locking and an adhesive that thermosets in high heat application environments. It is a class B (130°C - 226°F) electrical insulation · ½” Wide · 66’ Long H-ACIN-TGC0-0070-5066 |
||
|
|
|||||
|
HIGH TEMPERATURE CEMENT |
HOT LUBE |
||||
|
|
This cement insulated electricity but radiates heat. It also resists acids, oils, and temperature up to 3000°F. This is the same cement Hotwatt uses in electric heating elements and can be used for electric kilns, furnaces, and resistors. The cement hardens into a porcelain-like body by air drying without the use of kilns or injury to the finest resistant wire. 1 Quart container
H-AC00-EC0-N780-0000 |
Can greatly reduce heater to bore-seizure when properly applied Improves thermal conductivity heat transfer more quickly from heater to part being heated when Hot Lube is used Increases heater life, tighter fit made practical with use Not electrically conductive Solution is not considered hazardous Easy to use Withstands temperatures to 1600°F (875°C) H-AC00-HOT0-LUBE-0004 |
|
||
|
|
|||||
|
THERMOGLASS TAPE |
|||||
|
|
Woven glass cloth Temperature rated at 600°F Adhesive backing is temperature rated to 200°F 1/8” Thick 1” Wide Sold in 100’ Rolls |
||||
